What is the reason why the ice maker keeps draining during the ice making process

What is the reason why the ice maker keeps draining during the ice making process

The ice maker is a refrigeration equipment that uses the refrigerant of the evaporator cooling system to form ice.The cooling system is used. The principle and production method of the evaporator of the entire equipment are different, and the ice cubes formed will also be different. same.

Its ice types include square ice, flake ice, snowflake ice, commercial ice shaver  bullet ice, pearl ice, tubular ice, fluid ice, and spherical ice. These ice types have different uses and needs in different industries.

During the use of the ice machine, if you want the machine to operate normally and efficiently, you must do a good job in the daily maintenance of the ice machine, and master certain knowledge and experience of the ice machine, which can help us solve many problems in use in time .

The failure of the ice machine to drain water all the time is the cause analysis of the system ice block:

1. After the evaporator is damaged, long-term startup will bring the water molecules in the freezer and the water vapor molecules in the air into the compressor. When the evaporator is turned on, negative pressure will appear, and atmospheric pressure will bring the moisture in the moisture into the equipment. .

2. In the process of pressure leak test, the water vapor in the air is compressed into water and injected into the pipe will cause ice blockage.

3. The process tube of the equipment was not sealed after being opened, and maintenance was not performed in time. Long-term shelving of frost and occasional power-on, moisture in the air will be brought into the machine from outside the nozzle.

There is also a compressor that has no seal but has been left unused for a long time, and it is used on frost without drying treatment, which will cause ice blockage or dirty blockage.

4. The filter drier has been used for too long, causing the equipment to age and the drying and water absorption function to fail.

The solution to the price of the small ice machine is that the internal structure of the snowflake ice machine is relatively complicated. Once the ice block is found, we should contact the seller in time for after-sales treatment.